Mixing Tanks
Features:
- 75 HP explosion proof electric motor (480 Volt, 100 Amp - 3w 4p)
- Variable frequency drive with soft start on mixing pump
- Sidewinder industrial mixer
- 6” x 5” centrifugal pump (c/w mechanical seal)
- 12” impeller
- 6” mud roll
- 5 HP electric agitators in each compartment
- 2-3 inch guns in each compartment
- Steam coil in tank, 480 volt explosion proof electric roughneck heater in building
- 4” transfer line
| Dimensions | 400 bbl (63m3) Premix Tank | 550 bbl (87m3) Premix Tank |
Length | 46’ (14m) | 55' (16.7m) |
Height | 11’4” (3.5m) | 12'8" (3.9m) |
Width | 11’4” (3.5m) | 12' (3.6m) |
Weight | 37,000 lbs. (16,783 kg) | 55,000 lbs. (24,947 kg) |
Compartments | 2 | 3 |
Horizontal Invert Storage Tanks
Features:
- No crane or pickers are required for setup or rigging out
- No hoses on the ground around the tanks
- Recirculating gun line to turn over fluid within tank
- Transfer pump and hoses are positioned at operator level
- Equipped with a line crossing & 91.44 m (300 ft.) of 3” pressure tested hose
- High-efficiency 480v 30 amp, 3”x3” Gorman Rupp transfer pump
- Electronic volume monitors (Guided Wave Radar is used as measuring tool)
- Digital display and conventional float display
- Volume readout is backed up by battery
- Preset alarms when pre-programmed volume settings are reached
| Dimensions | 54’ Length x 10’3” Width x 12’4” Height 1645.92 cm Length x 312.42 cm Width x 376.56 cm Height |
| Dry Weight | Master: 45,000 lbs., 20,412 kg Slave*: 38,500 lbs., 17,463 kg *includes line crossing |
| Power Requirements | 1 x 480 volt, 3 phase, 30 amp 1 x 110 volt plugin |